Lithium-ion batteries for Toyota Motor Corp.’s new Prius plug-in hybrid vehicle (PHV), known as Prius Prime in the U.S. (Photographer: Tomohiro Ohsumi/Bloomberg) 

Who’s Ahead In The Battery Race?

(Bloomberg) -- In the race for the next generation battery, lithium-ion technology has made huge leaps in recent years. But the power packs continue to have drawbacks: they use raw material mined in unstable countries, they’re dangerous if they break and they could pack more power.

Solving those conundrums is the focus of hundreds of companies and thousands of scientists all over the world. And in that crowded field, Tesla Inc., a French billionaire and a startup in Massachusetts are pulling ahead.

“What’s coming next are technologies that improve performance, hold more energy, last longer at a lower cost,” said Jeff Chamberlain, chief executive officer of Volta Energy Technologies LLC, an investment fund with a focus on next-generation storage. “Hundreds of millions, if not low billions, is being spent on research.”

Below is a list of the most promising players and the technologies making and selling these futuristic batteries today.

Who’s Ahead In The Battery Race?

1. Reducing Cobalt: Tesla

Battery makers are working to pare down the amount of cobalt in their devices to the bare minimum to control costs and reputational risk.  The problem with cobalt is that it’s largely mined in the Democratic Republic of Congo, a country that’s been a conflict zone for decades. While most of the material is extracted in commercial mines, about 15 percent is estimated to be from artisanal mines that often use child labor, according to Darton Commodities Ltd.

Who’s Ahead In The Battery Race?

So companies are under increasing pressure to be able to track where their cobalt is from and show that it’s ethically sourced. This is easier said than done, as the vast majority of the mineral is processed in China where materials from different mines are mixed together indiscriminately.

“Cobalt is unfortunately good at maintaining the structure of the material, it’s like the cement of the battery,” said James Frith, energy storage analyst at Bloomberg NEF. “It prevents deterioration of the chemistry during the phase of charge and discharge.”

The Congo government recently said it will raise royalty taxes on producers for the second time this year. The instability of the supply chain coupled with soaring demand for the material from the fast-growing electric vehicle sector led cobalt prices to hit a peak of $44.08 a pound in late April, more than quadrupling from a level of $10.60 at the start of 2016. The metal is currently trading at $34 a pound.

Who’s Ahead In The Battery Race?

The battery that Tesla’s currently making for its Model 3 cars and its PowerWalls currently contains less than 3 percent cobalt, according to the company. That’s less than than in the devices that the leading manufacturers in Asia that are targeting for the future.

It started manufacturing it in June last year, ramping up production in line with its Model 3 output which is targeting 500,000 vehicles in 2018. Tesla said in August that it’s producing 20 gigawatt-hours of batteries per year.

“The cobalt content of our Nickel-Cobalt-Aluminum cathode chemistry is already lower than next-generation cathodes that will be made by other cell producers,” said Tesla CEO Elon Musk on a recent shareholder call. “We think we can get the cobalt to almost nothing.”

Who’s Ahead In The Battery Race?

While there are a few smaller companies researching and manufacturing batteries without any cobalt at all, from Lithium Werks in the Netherlands to U.S. startup Conamix, they’re not producing them anywhere close to Tesla’s scale.

Korean chemicals giant LG Chem Ltd. currently makes batteries with 20 percent cobalt. It’s aiming to halve it between 2020 and 2021. SK Innovation Co Ltd. in Seoul has finalized the development of a battery that currently has 10 percent cobalt, but isn’t making it yet, according to a spokesman.

2. Safer Batteries: Bollore Group

Battery mishaps frequently make the news because the power packs can catch fire. The Samsung smartphone and the Boeing Dreamliner incidents are hard to forget. Electric vehicle batteries are also susceptible to this in the event of a crash that punctures the power pack. The reason for this is the liquid electrolyte. It’s a flammable solution that carries the charge from one end of the battery to the other. If it leaks, it can ignite.

In order to avoid this, battery makers are trying to switch it to a solid material. Blue Solutions, a division of Bollore Group, the French company owned by billionaire Vincent Bollore, is leading the pack in solid state batteries and already has two factories up and running.

This is an area that has attracted close to $400 million in capital in recent months. Ionic Materials, a startup based in the U.S. working on replacing the liquid with a plastic, raised $65 million in its Series C round earlier this year. It counts Renault-Nissan-Mitsubishi, Hyundai, Total and Hitachi among its investors. Over the summer, Volkswagen channeled $100 million into QuantumScape, a company in California that’s working on a similar device. The carmaker said it wants to establish a production line for the technology by 2025.

Who’s Ahead In The Battery Race?

Blue Solutions is already making solid state batteries at a commercial scale. Its factories in northern France and Canada are pumping out 500 megawatt-hours of packs annually, enough to power 10,000 electric vehicles. It has partnerships with carmakers such as Daimler and Citroen and engineering firm Gaussin Manugistique.

The company is working to “introduce our battery technology in their existing products,” said a spokesman for Blue Solutions in an email. “We still have to convince new customers they are right to choose the first available solid state lithium metal batteries.”

Blue Solutions is planning to introduce on an upgraded version of its solid state battery that’s expected to store 40 percent more energy in the second half of 2019.

3. Energy Density: Pellion Technologies

The ultimate goal of a battery is to pack the maximum amount of power into a very small and light space. That’s where energy density comes in. The more power a battery can store, the longer the car’s range and the more hours a phone or laptop lasts between charges. Weight is also key. The lighter the machine is, the less energy it’ll require for propulsion. This is especially important for vehicles, drones and the nascent electric plane industry.

Pellion Technologies, a startup in Massachusetts, makes a battery that it says can store double the amount of electricity of a conventional power pack. It started shipping it last quarter to customers and is planning to ramp up production 10-fold next year.

Battery makers are trying to boost energy density by making the anode, the part of the battery that has a negative charge, with other materials. It’s currently graphite, the stuff in pencils. Researchers are replacing parts of it with silicon and a type of lithium known as lithium metal. Conventional batteries contain the element in a salt form but there is also a version that’s a metal, which is typically less stable.

Who’s Ahead In The Battery Race?

“When you switch from graphite to silicon you can reduce the amount of materials needed to build these anodes significantly,” said Ravi Manghani, energy storage director at Wood Mackenzie Ltd.’s GTM Research. “Changing it to be lithium metal, we’re talking about a doubling or tripling of energy density.”

Pellion Technologies Inc’s battery uses lithium metal only when it’s charging, which makes it safe to manufacture, according to Chief Executive Officer David Eaglesham. It started selling it earlier this year with its first order in April. Since then, it’s made about 30,000 cells and expects to raise this to hundreds of thousands next year.

Pellion’s battery “can be manufactured at any lithium-ion manufacturing plant,” Eaglesham said. “We have contract manufacturing partnerships that give us the ability to expand capacity.”

©2018 Bloomberg L.P.